大气压下甲烷火花放电制乙炔和合成气

用大气压下火花放电方法和发射光谱原位诊断技术, 对CH₄直接转化制乙炔和间接转化制合成气进行了研究, 并与介质阻挡放电进行了比较。结果表明, 火花放电具有能量效率高的突出优点, 能够高效地将CH₄活化成C原子、H原子和C₂等活泼物种。当CH₄单独进料时, 能得到以C₂H₂为主的烃类产物。当CH₄与CO₂和O₂共进料时, 能得到H₂/CO比值可调的合成气产物。在用火花放电转化CH₄和CO₂制合成气时, 添加O₂能够避免反应器的结炭问题, 反应温度只需225 ℃, 与常规催化法相比具有明显的低温优势。     

铝基火花源发射光谱仪测定MB1镁合金中锰含量

建立了用铝基体火花源原子发射光谱仪现有通道硬件测定镁合金(MB1)中锰元素含量的方法.方法线性相关系数为0.967 6,RSD为1.66%.对8个未知样品进行了测试,结果与化学分析方法所得结果一致.     

Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion

The objective of this part of the paper is to summarize the information concerning the authors' works in the field of simulation of two-phase gas-particle turbulent flows with heat transfer and combustion. A kinetic equation had been derived for the probability density function (PDF) of the particle velocity, temperature, and mass distributions in turbulent flows. This PDF equation is used for the construction of the governing conservation equations of mass, momentum, and heat transfer in the dispersed particle phase.The numerical scheme incorporates two-phase fluid dynamics, convective and radiative heat transfer, and combustion. The proposed models have been applied to the calculation of various particle-laden turbulent flows in jets, combustion and gasification chambers, and furnaces.     

不同退火方式对Ni/SiC接触界面性质的影响

采用快速热退火(rapid thermal annealing, RTA)法和脉冲激光辐照退火(laser spark annealing, LSA)法, 在n型4H-SiC的Si面制备出Ni电极欧姆接触. 经传输线法测得RTA样品与LSA样品的比接触电阻分别为5.2×10^-4 Ω·cm², 1.8× 10^-4 Ω·cm². 使用扫描电子显微镜、原子力显微镜、透射电子显微镜、拉曼光谱等表征手段, 比较了两种退火方式对电极表面形貌、电极/衬底截面形貌和元素成分分布、SiC衬底近表层碳团簇微结构的影响. 结果表明, 相比于RTA, LSA法制备出的欧姆接触在电极表面形貌、界面形貌、电极层组分均匀性等方面都具有明显优势, 有望使LSA成为一种非常有潜力的制备欧姆接触的退火处理方法.     

Adhesion behavior of endothelial progenitor cells to endothelial cells in simple shear flow

The adhesion of endothelial progenitor cells(EPCs) on endothelial cells(ECs) is one of the critical physiological processes for the regenesis of vascular vessels and the prevention of serious cardiovascular diseases.Here,the rolling and adhesion behavior of EPCs on ECs was studied numerically.A two-dimensional numerical model was developed based on the immersed boundary method for simulating the rolling and adhesion of cells in a channel flow.The binding force arising from the catch bond of a receptor and ligand pair was modeled with stochastic Monte Carlo method and Hookean spring model.The effect of tumor necrosis factor alpha(TNF-α) on the expression of the number of adhesion molecules in ECs was analyzed experimentally.A flow chamber system with CCD camera was set up to observe the top view of the rolling of EPCs on the substrate cultivated with ECs.Numerical results prove that the adhesion of EPC on ECs is closely related to membrane stiff-ness of the cell and shear rate of the flow.It also suggests that the adhesion force between EPC and EC by P-selectin glycoprotein ligand-1 only is not strong enough to bond the cell onto vessel walls unless contributions of other catch bond are considered.Experimental results demonstrate that TNF-α enhanced the expressions of VCAM,ICAM,P-selectin and E-selectin in ECs,which supports the numerical results that the rolling velocity of EPC on TNF-α treated EC substrate decreases obviously compared with its velocity on the untreated one.It is found that because the adhesion is affected by both the rolling velocity and the deformability of the cell,an optimal stiffness of EPC may exist at a given shear rate of flow for achieving maximum adhesion rates.     

不同沙粒底面下气泡脉动特性实验研究

通过高速摄影系统对电火花气泡与不同沙粒底面间的相互作用进行了实验研究,并改变气泡与沙粒底面之间的距离.实验结果表明:气泡在与沙粒底面的相互作用中会产生两种明显不同的现象,即形成与近刚性壁面类似的气泡射流以及“蘑菇状”气泡,“蘑菇状”气泡撕裂形成两个气泡,随后产生两个反方向的沿轴线方向的射流.沙粒底面边界具有刚性与弹性两种特征.另外,随着气泡与沙粒底面之间的距离d的增大,气泡脉动周期先增大然后减小,存在气泡脉动周期峰值.对于不同的沙粒底面边界,出现气泡脉动周期峰值的距离d随着沙底粒径的增大而越小.     

Buck变换器的输出短路火花放电能量及输出本质安全判据

为得出Buck变换器的输出本质安全判据, 基于安全火花试验装置, 对其输出短路火花放电特性进行了试验研究, 发现其放电过程可分为介质击穿、火花产生、火花维持和火花熄灭四个阶段.基于得出的火花放电特性, 对其输出短路火花放电能量进行了深入分析, 指出对于给定电感的Buck变换器, 当负载电阻 R_L小于给定电感对应的临界电阻R_LC时, 火花放电能量是关于R_L的凹函数; 而在R_L > R_LC时, 是关于R_L的凸函数.考虑到实际的参数取值范围, 进一步指出: R_L < R_LC时的火花放电能量随R_L的增加而增大, 且在R_L=R_LC时达到最大值; 而在R_L > R_LC时, 则随着R_L的增加, 先增大后减小, 在增加到特征电阻R_{L, DCM}时达到最大值. 得出了变换器在全动态范围内的最危险工况: 变换器在输入电压最高及负载电阻等于R_{L, DCM} 时工作于DCM, 此时, 短路火花放电能量达到最大值.基于能量等效, 提出了可模拟变换器输出短路放电特性的等效简单电容电路及输出本质安全判据, 仿真和试验结果验证了理论分析及所提出判据的正确性和可行性. 关键词： Buck变换器 本质安全 短路火花放电能量 输出本质安全判据     

束流位置监测系统的研制及其在国家同步辐射实验室二期工程中的应用

 介绍一种储存环束流位置监测系统的标定装置。这套标定装置是为NSRL二期工程储存环注入段真空盒改造而研制的。系统的标定精度达±0.01mm。该装置已用于新增注入段真空管的束流位置探测器的定标，获得了探头定标值，并根据其拟合和计算结果对注入段真空管进行了筛选，被选中的真空管已装入储存环注入段。     

气体探测器雪崩过程的研究

基于汤逊气体放大电子雪崩模型和一定的物理假设,导出描绘气体探测器中正比模式和有限正比模式的一个统一公式.该公式很好地符合实验事实,由此还得到了描述空间电荷作用强弱的参数──等效电容以及表征探测器工作状态的参量──线性度.同时,在假定SQS雪崩中空间电荷起重要作用的情况下,该公式很好地描述了其输出电量随高压的线性关系.